WEBs CIPer Model 50 – USER GUIDE
9 31-00198—01
HMI PIN lock-out
For Cyber Security reasons, users will be locked-out after multiple entries of a wrong PIN:
• After three wrong PIN entries in a row, user login is blocked for 1 min. For each wrong PIN after this, the
user must wait for 1 min.
• This time sequence is repeated until a successful login is done.
NOTE:
For Cyber Security reasons, all users are blocked during the waiting time.
This is an intentional behavior.
1
st
time wrong PIN:
2
nd
time wrong PIN:
3
rd
time wrong PIN:
Wait time is 1 minute for all users.
4
th
/ 5
th
/ 6
th
/ … etc time wrong PIN:
Correct PIN entry will restart the lock-out sequence.
To Next Page
Loading...
