WEBs CIPer MODEL 50 – USER GUIDE
31-00198—01 30
CIPer Model 50 Firmware
Firmware & Hardware compatibility
This firmware version 4.4.92.2.1.5 is compatible with all released CIPer Model 50 models, date code 1844 or
later, see table below:
CIPer Model 50
including license for:
• 100 Global Points (Panel-bus,
on-board I/O) +10 Analytics
Points
• WEBS N4 Software
Maintenance Agreement
Firmware upgrade
Check the installed firmware version in your CIPer Model 50.
Open WEBs N4, go to the Platform/Platform Administration and check the Version of the Niagara
Runtime for the CIPer Model 50 installed.
Firmware updates may be available on the Honeywell Buildings Forum and the firmware upgrade procedure
will be available with the firmware updates. If there are any queries on firmware / Firmware updates, please
reach out to Honeywell WEBs technical support (WEBsSquad@honeywell.com).
To Next Page
Loading...
