Honeywell CIU 888 - Page 128

Getting Started
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 3 - 98
$*6
3. Click the Secondary FTE Host Port tab to view the Property.
You can view or edit this property.
NOTES: 1. If configuring for Experion network, both FTE A and FTEB should be in
same subnet.
2. If configuring in non-redundancy mode, then Transparency and IP
switchover decision maker should be disabled.
3.2.13.2 Configuring LAN port
1. On the CIU 888 node, click LAN port.
Server URL This setting depicts the server URL. The OPC UA cli-
ents to CIU 888 using this URL. The URL shall be in the
below format.
opc.tcp://192.168.20.10:51000
Default value: Empty string
Parameter Configuration option
Secondary IP Address In case of redundant CIUs, this indicates the IP address
of the corresponding Ethernet port in the partner CIU.
Format: w.x.y.z
Example: 10.70.100.102
Parameters Configuration options