Honeywell CIU 888 - Configuring Ethernet Host port

Getting Started
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 3 - 93
$*6
You can view or edit these properties.
3.2.13 Configuring Ethernet Host port
3.2.13.1 Configuring FTEA and FTEB ports
1. On the CIU 888 node, click FTEA port.
Properties Description
Available Entities This displays all entities which are not associated with
modbus map.
NOTE:This includes the list of entities provided by CIU
880 Prime and CIU 880 Plus user defined host port
Modbus mapping and also new entities added in CIU
888.
Click this button to move all entities in the ‘Available
entities’ to the ‘Selected entities’
Click this button to move all entities in the ‘Selected
entities’ to the ‘Available Entities’.
Click this button to move the selected entity in the
‘Available entities’ to the ‘Selected entities’.
Click this button to move the selected entity in the
‘Selected entities’ to the ‘Available Entities’.
Click this button to move the selected entity in the
‘Selected entities’ one position up.
. Click this button to move the selected entity in the
‘Selected entities’ one position down.
Click this button to select ‘Entis Pro’ compliant entities
in 'Selected entities'.
Definitions
Entity ID Entity ID number
Entity Name Name of the Entity
Type Modbus data type of the entity.
Size Number of Modbus registers
Scale Scaling factor
Offset Offset value