Honeywell CIU 888 - Importing an existing site configuration

Getting Started
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 3 - 111
$*6
3.6 Importing an existing site configuration
1. From the CIU 888 Service Tool window, Choose File > Open.
The SelectSiteForm window appears.
2. Click Import.
3.6.1 Recommended actions if importing from prior to R150.1 Databases

If CIU Plus compliant modbus maps are configured in TCP/IP, then
delete and re-create CIU Plus compliant map.
 If ENTIS compliant modbus map is configured in TCP/IP, then delete
and recreate ENTIS compliant map.
 If Density profiles are configured as part of TCP/IP User defined
modbus maps, then set the density map to default and configure it as
required.