Honeywell CIU 888 - Verifying the working of the system setup

Commissioning of a Redundant System Setup
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 5 - 8
$*6
d) Click on Close and when prompted for a restart, click on
Yes.Once the CIU restarts, ENTIS will communicate with the CIU
securely over OPC.
NOTE: The ENTIS client certificate is valid for a period of 1 year after which a new
certificate will be generated. The new certificate must be approved in a similar
way.
5.12 Verifying the working of the system setup
The final step in the commissioning procedure is verifying if the
redundant CIU 888 system setup is working properly. See section 4.10
for more information.
5.13 Sealing the CIU 888s
If the CIU 888s sealing option is licensed, the next step is to have them
sealed by a representative of the LM authorities or by a LM accredited
user. Refer to the CIU 888 Sealing Guide (Part No. 4417595) for more
information.
NOTE: If the CIU 888s do not feature the option to be sealed, the W&M lock key
switches and configuration lock key switches can either be locked or left
unlocked.