Honeywell CIU 888 - Sealing the CIU 888

Commissioning of a Standalone System Setup
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 4 - 18
$*6
Perform the following procedure:
1. Launch the CIU 888 Web interface. See section 3.1.4 for more
information.
2. Verify the CIU 888 configuration options in the Web interface.
3. Logout of the Web interface.
4. Verify the CIU 888 functioning by checking the received values on
the Modbus Host and / or OPC UA TCP Host.
4.11 Sealing the CIU 888
If the CIU 888 sealing option is licensed, the next step is to have it
sealed by a representative of the LM authorities or by a LM accredited
user. Refer to the CIU 888 Sealing Guide (Part No. 4417595) for more
information.
NOTE: If the CIU 888 does not feature the option to be sealed, the W&M lock key
switch and the configuration lock key switch can either be locked or left
unlocked.