Honeywell CIU 888 - Page 217

Appendix D - Tank Capacity Table
Part No.: 4417584_Rev12 Configuration Manual
CIU 888 D - 31
$*6
APPENDIX D TANK CAPACITY TABLE
Refer to the below table for the Tank Capacity Table format.
Strap File Example Description
[TANK_ID] [Tank Identification]
Name = TNK-03 ASCII string: the name of the tank
Date = 15-Feb-15 ASCII string: the date this file is
generated
Time = 12:34:00 PM ASCII string: the time this file is
generated
Level = 2 1 = m xxx.xxxx
2 = mm xxxxxx.x
3 = ft xxx.xxxx
4 = in xxxx.xxx
5 = in/16 xxxxxx.x
Volume = 51 50 = l xxxxxxxxx
51 = m3 xxxxxx.xxx
52 = USgal xxxxxxxx.x
53 = bbls xxxxxxx.xx
Ullage = 0 0 = innage
1 = ullage
Straps = 6 Number of straps
[STRAPS] [Strap data (level vs. volume)]
1 = -233.0 first (and lowest) strap
2 = 100.0
3 = 1006.3
4 = 2001.7 10732.000
5 = 10032.0 52721.000
6 = 20531.4 98321.000 last (and highest) strap
[KSISTRAPS] KSISTRAPS section is optional. It
is required only if RIC is
configured.In case of water strap
table KSISTRAPS section is not
required.
1 = 0.168 -
2 = 0.333 -
3 = 0.950 -
4 = 1.843 -
5 = 2.277 27.3562
6 = 4.064 27.3999
[EOF] [End Of File]