Page 8 of 120
enCore FC
1 General Information
1.1 The enCore/enSuite Concept
enCore is the name of an Elster product platform for advanced measure-
ment devices. All enCore devices are based on the same hardware
components and software concepts. Both the hardware and software of
enCore devices have a modular design; the configuration of the process
board equipment and the arrangement of software components are variable.
On one hand, the software components consist of basic functionalities,
which are provided by the Basic System with its System Function Blocks
(abbreviated as: SFBs), and on the other hand consist of application-related
functionalities, which come with different Application Function Blocks
(abbreviated as: AFB). Owing to this modular design principle, each device
can be optimally adapted to individual requirements.
enSuite is the name of the PC software supporting all enCore devices along
with a number of other Elster devices. The enSuite software provides tools
for configuration, parameterization, diagnosis, software downloads and other
services.
Parameterization in enSuite
Please note that the changes that you make in parameterization
of enSuite become active in the device only when you activate the
action Transfer parameterization to device and after the enCore
device restarts (automatically).
volume “Configuration fo Device Software” of enCore FC
manual
To Next Page
Loading...
Need help?
General
