Honeywell FF-SPS4 Series User Manual

10 107063-11 EN FR26 GLO 800 Printed in France
Table 1-2 Automatic restart mode
Receiver indicators
status
Optical signal Relays status Actions
Absent De-energized Adjust the optical alignment
Too weak De-energized
Keep adjusting the
alignment
Close to the limit Energized Optimize the adjustment
Sufficient Energized
Optimum adjustment is
achieved, the system is
operating
Light on Light off Flickering light
Table 1-3 Start interlock mode
Receiver indicators
status
Optical signal Relays status Actions
Absent De-energized Adjust the optical alignment
Too weak De-energized
Keep adjusting the
alignment
Close to the limit De-energized Optimize the adjustment
Sufficient De-energized
Optimum adjustment is
achieved, press and release
the push button
Sufficient Energized The system is operating
Light on Light off Flickering light
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Honeywell FF-SPS4 Series Specifications

General

Brand	Honeywell
Model	FF-SPS4 Series
Category	Security Sensors
Language	English