Honeywell HC30W45R2 Configuration Guide

xi
About This Document
This document provides instructions for accessing, configuring, and operating the Honeywell
30 Series IP cameras. This document is intended for system installers, administrators, and
operators.
Overview of Contents
This document contains the following chapters and appendixes:
• Chapter 1, Introduction, provides an overview of the main features of the Honeywell 30
Series IP cameras.
• Chapter 2 , Accessing the Camera, describes how to install the ConfigTool to access the
camera remotely from a web browser. It also describes how to update your camera’s
firmware.
• Chapter 3, Logging In and Viewing Live Video, describes how to log in to a camera and
using the main page.
• Chapter 4, Configuring Camera Settings, describes camera configurations.
• Chapter 5, Configuring Network Settings, describes network configurations.
• Chapter 6, Configuring Video Analytics, describes video analytics configurations.
• Chapter 7, Configuring Storage Settings, describes storage configurations.
• Chapter 8, Configuring System Settings, describes general system configurations.
• Chapter 9, Viewing System Information, describes system information, such as version, log
and online user information.
• Chapter 10, Troubleshooting, lists common problems and solutions.
• Chapter 11, Appendix, lists the descriptions of symbols.

Honeywell HC30W45R2 Specifications

General

Windows operating systems supported	Windows 10, Windows 7
DC-in jack	Yes
Ethernet LAN (RJ-45) ports	1
Lens diameter	2.8 mm
Fixed focal length	2 mm
Maximum aperture number	2
DC output voltage	12
Power source type	DC, PoE
Power consumption (max)	12.95 W
Operating temperature (T-T)	-30 - 60 °C
Operating relative humidity (H-H)	0 - 90 %
Wi-Fi	No
Number of users	10 user(s)
Ethernet interface type	Gigabit Ethernet
Bit rate control	Constant Bit Rate (CBR)
Total megapixels	5 MP
Gain control type	Auto
Maximum resolution	2560 x 1920 pixels
Video formats supported	H.264, H.265
Analog signal format system	NTSC, PAL
Supported graphics resolutions	640 x 480 (VGA), 800 x 600 (SVGA), 1280 x 960, 1600 x 1200 (UXGA), 2048 x 1536 (QXGA), 2560 x 1920
Compatible memory cards	MicroSD (TransFlash), MicroSDHC, MicroSDXC
Maximum memory card size	256 GB
Sensor type	CMOS
Optical sensor size	1/2.7 \
White balance	Auto, Manual
Minimum illumination	0.03 lx
IK code	IK10
Form factor	Spherical
Mounting type	Ceiling/wall
Product color	Black, White
Country of origin	Taiwan
International Protection (IP) code	IP66
Type	IP security camera
Placement supported	Indoor & outdoor
Connectivity technology	Wired & Wireless
Maximum operating distance	30 m

Weight and Dimensions

Depth	99.8 mm
Width	133.3 mm
Weight	760 g
Package weight	1100 g