EasyManuals Logo

Honeywell HC30W45R2 Configuration Guide

Honeywell HC30W45R2
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
Configuring Camera Settings
37
Figure 4-16 Audio
Mute: Check to disable audio transmission from the Network Camera to all clients.
Internal microphone input gain: Select the gain of the internal audio input according to
ambient conditions. Adjust the gain from 0% (least) to 100% (most).
Audio type: Select audio codec as G.711 or G.726 and the bit rate.
G.711 provides good sound quality and requires about 64Kbps. Select pcmu (μ-Law) or
pcma (A-Law) mode.
G.726 is a speech codec standard covering voice transmission at rates of 16, 24, 32, and
40kbit/s.
After you complete the settings on this page, click Save to enable the settings.
Configuring Digital PTZ Settings
This section describes how to control the camera’s digital Pan/Tilt/Zoom operation.
Within a field of view, it allows you to quickly move the focus to a target area for close-up
viewing without physically moving the camera. You are still able to digitally zoom and navigate
the camera’s viewable area.
Go to Setup Camera Setup PTZ Settings.

Table of Contents

Other manuals for Honeywell HC30W45R2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell HC30W45R2 and is the answer not in the manual?

Honeywell HC30W45R2 Specifications

General IconGeneral
Windows operating systems supportedWindows 10, Windows 7
DC-in jackYes
Ethernet LAN (RJ-45) ports1
Lens diameter2.8 mm
Fixed focal length2 mm
Maximum aperture number2
DC output voltage12
Power source typeDC, PoE
Power consumption (max)12.95 W
Operating temperature (T-T)-30 - 60 °C
Operating relative humidity (H-H)0 - 90 %
Wi-FiNo
Number of users10 user(s)
Ethernet interface typeGigabit Ethernet
Bit rate controlConstant Bit Rate (CBR)
Total megapixels5 MP
Gain control typeAuto
Maximum resolution2560 x 1920 pixels
Video formats supportedH.264, H.265
Analog signal format systemNTSC, PAL
Supported graphics resolutions640 x 480 (VGA), 800 x 600 (SVGA), 1280 x 960, 1600 x 1200 (UXGA), 2048 x 1536 (QXGA), 2560 x 1920
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Maximum memory card size256 GB
Sensor typeCMOS
Optical sensor size1/2.7 \
White balanceAuto, Manual
Minimum illumination0.03 lx
IK codeIK10
Form factorSpherical
Mounting typeCeiling/wall
Product colorBlack, White
Country of originTaiwan
International Protection (IP) codeIP66
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWired & Wireless
Maximum operating distance30 m
Weight and Dimensions IconWeight and Dimensions
Depth99.8 mm
Width133.3 mm
Weight760 g
Package weight1100 g

Related product manuals