Honeywell HC30W45R2 Configuration Guide

Performance Series IP Camera Software Configuration Guide
22
Note
The power line frequency is changed, you must disconnect and
reconnect the power cord of the camera in order for the new
setting to take effect.
Video orientation:
• Flip: vertically reflect the display of the live video;
• Mirror: horizontally reflect the display of the live video.
• Select both Flip and Mirror if the camera is installed upside-down (e.g., on the ceiling) to
correct the image orientation.
• Rotate: Rotate the video by 90 degrees or 270 degrees. The rotation here indicates
clockwise rotation. Rotation can be applied with flip, mirror, and physical lens rotation
settings to adapt to different mounting locations, such as a corridor.
Figure 4-2 Video Orientation
Original Flip Original Mirror Original
Rotate 90
degrees
(
clockwise
)
Note
The flip/mirror/rotate operation will clear the video settings,
privacy mask settings, exposure window, motion settings, preset
position and viewing window.
Day/Night Settings
Switch to B/W in night mode: Check to enable the camera to automatically switch to
Black/White during night mode.
Mode:
• Auto mode (The Day/Night Exposure Profile will not be available if Auto mode is selected)
The camera automatically removes the filter by judging the level of ambient light.
Note Select auto mode will disable profile of exposure settings.
• Day mode

Honeywell HC30W45R2 Specifications

General

Windows operating systems supported	Windows 10, Windows 7
DC-in jack	Yes
Ethernet LAN (RJ-45) ports	1
Lens diameter	2.8 mm
Fixed focal length	2 mm
Maximum aperture number	2
DC output voltage	12
Power source type	DC, PoE
Power consumption (max)	12.95 W
Operating temperature (T-T)	-30 - 60 °C
Operating relative humidity (H-H)	0 - 90 %
Wi-Fi	No
Number of users	10 user(s)
Ethernet interface type	Gigabit Ethernet
Bit rate control	Constant Bit Rate (CBR)
Total megapixels	5 MP
Gain control type	Auto
Maximum resolution	2560 x 1920 pixels
Video formats supported	H.264, H.265
Analog signal format system	NTSC, PAL
Supported graphics resolutions	640 x 480 (VGA), 800 x 600 (SVGA), 1280 x 960, 1600 x 1200 (UXGA), 2048 x 1536 (QXGA), 2560 x 1920
Compatible memory cards	MicroSD (TransFlash), MicroSDHC, MicroSDXC
Maximum memory card size	256 GB
Sensor type	CMOS
Optical sensor size	1/2.7 \
White balance	Auto, Manual
Minimum illumination	0.03 lx
IK code	IK10
Form factor	Spherical
Mounting type	Ceiling/wall
Product color	Black, White
Country of origin	Taiwan
International Protection (IP) code	IP66
Type	IP security camera
Placement supported	Indoor & outdoor
Connectivity technology	Wired & Wireless
Maximum operating distance	30 m

Weight and Dimensions

Depth	99.8 mm
Width	133.3 mm
Weight	760 g
Package weight	1100 g