www.honeywell.com/security
104 | Embedded Network Video Recorder User Guide
Configuring Camera Masking Settings
If something masks or blocks part of the camera lens, or if the output video turns to one color
due to a change in the environment’s lighting, the system can alert you to guarantee video
continuity.
Select Camera Masking from the Event Type drop-down list.
Figure 3-52 Camera Masking Configuration Interface
Table 3-25 Camera Masking Detection Configurations
Configuration Description
Event Type Select the event detection type. Select from Motion
Detection, Video Loss, or Camera Masking.
Channel Select a channel.
Enable Click to enable event detection.
To Next Page
Loading...