Honeywell HEN04111 - Figure 2-4 Removing the NVR Cover; Figure 2-5 Loosening the Four Screws in the HDD Housing; Figure 2-6 Placing the HDD

www.honeywell.com/security
36 | Embedded Network Video Recorder User Guide
Figure 2-4 Removing the NVR Cover
2. Loosen four screws in the HDD.
Figure 2-5 Loosening the Four Screws in the HDD Housing
3. Align the HDD with the four holes in the bottom of the NVR housing.
Figure 2-6 Placing the HDD
4. Turn the NVR upside down, and then turn the screws to firmly attach the HDD to the NVR
housing.