www.honeywell.com/security
88 | Embedded Network Video Recorder User Guide
Figure 3-44 Message Indication FTP Connection Failure
Alarm Center
Not functional at this time.
Configuring SNMP
Simple Network Management Protocol (SNMP) provides the basic network management frame
for the network management system. SNMP is widely used in many environments, in many
network devices, software, and systems.
Note Use the corresponding software tool (MIB Builder and MG-SOFT MIB Browser,
plus two MIB files: BASE-SNMP-MIB, and NVR-SNMP-MIB) to connect to the
NVR.
The corresponding device configuration information appears after you have
successfully connected.
1. Double-click SNMP in the Network Setting configuration window. The SNMP
configuration interface appears.
To Next Page
Loading...