NVR Configurations | 111
800-18160 - A - 06/2014
Figure 3-56 Display Configuration Interface
Table 3-28 Display Configurations
Configuration Description
Transparency Adjust the transparency of the GUI overlay. Select from 128 to
255.
Channel Name Customize the channel name. You can enter up to 31
characters. Changes here apply only to the NVR local end.
1. Click Modify. The Channel Name configuration interface
opens.
2. Enter camera names in the editable fields.
3. Click Save.
Note Modifications here apply only to the local end only.
You need to open the web client to refresh the channel
name.
Time Display Turn time display On or Off for playback.
Channel Display Turn channel display On or Off for playback.
To Next Page
Loading...