Honeywell HEN04111 - Figure 3-60 Manual Add Configuration Interface; Figure 3-61 Short-Cut to Remote Device Configuration Interface

www.honeywell.com/security
116 | Embedded Network Video Recorder User Guide
Figure 3-60 Manual Add Configuration Interface
2. Select a connection mode: Auto, TCP (default), or UDP.
Shortcut Menu
If there is no IP camera connected, the GUI shows Figure 3-61.
Figure 3-61 Short-cut to Remote Device Configuration Interface
Click the + in the center of the Preview interface for the channel which is not connected to an
IP camera.
The Remote Device configuration interface appears.