www.honeywell.com/security
64 | Embedded Network Video Recorder User Guide
Figure 3-24 Encode Interface
Table 3-9 Encode Configurations
Setting Description
Channel Select a channel.
Type Select an encoding type from the drop-down list. Select from:
Regular, Motion Detect, and Alarm. You can select the various
encoding parameters for the different recording types.
Compression The NVR supports H.264, MPEG4, and MJPEG.
Resolution The mainstream resolution type is IP camera's encoding
configuration. Select from 1080p, 720p, D1, SXGA, 1280x960.
Frame Rate Select from 1 f/s to 25 f/s in NTSC mode; 1 f/s to 30 f/s in PAL mode.
Bit Rate Type Select from CBR and VBR. If you select VBR, then you can configure
the video quality.
Bit Rate Select from 4096, 6144, 8192, or customize the Bit Rate setting. If
you choose Customize, you must enter a bit rate value.
Audio/video Enable or disable the audio/video.
To Next Page
Loading...