Honeywell HEN04111 - Figure 5-12 PTZ Controls

www.honeywell.com/security
152 | Embedded Network Video Recorder User Guide
Figure 5-12 PTZ Controls
Table 5-5 PTZ Setup Configurations
Control Description
Scan 1. Select Scan from the drop-down list.
2. Click Set. You can set the scan left and scan right limit.
3. Use the direction buttons to move the camera to the desired
location, then click the Set Left button.
4. Move the camera again, then click the Set Right button to set
the right limit.
Preset 1. Select Preset from the drop-down list.
2. Position the camera, and enter a Preset number. The Add
button appears.
3. Click Add to add the preset.
Tour 1. Select Tour from the drop-down list.
2. Enter a preset value. The Add button appears.
3. Click Add Preset button, and the new preset is added to the
tour.
4. Repeat for all the presets you want to include in the tour.
To remove a preset from the tour, click the Delete preset button.
3D Intelligent Positioning Key
Click here to
display the PTZ
control platform.
Click here to hide
the PTZ control
platform.
PTZ control platform