Honeywell HEN04111 - Figure 3-53 Pan;Tilt;Zoom Configuration Interface - Local

www.honeywell.com/security
108 | Embedded Network Video Recorder User Guide
Figure 3-53 Pan/Tilt/Zoom Configuration Interface - Local
Note The above configurations are available only if you choose Local for the PTZ type.
If you choose Remote, you can only select the channel. See Figure 3-54.
Table 3-26 Pan/Tilt/Zoom Configurations
Configuration Description
Channel Select the camera channel.
PTZ Type Select from Local or Remote.
Protocol Select a PTZ protocol (such as PELCOD).
Address The default address is 1.
Baudrate Select a baud rate. The default is 9600.
Data Bits The default is 8.
Stop Bits The default is 1.
Check Select from Odd, Even, or None. The default is None.