NVR Configurations | 47
800-18160 - A - 06/2014
5 File List Switch Button Double-click to view the snapshot/recorded file for
the currently selected day.
The file displays the recorded file for the first channel.
The system can display up to 128 files at a time. Use
the/ or the mouse to select the file. Select a file,
then double-click the mouse or click ENTER to begin
playback.
Use the following interface for entering a time period
to search for recorded video or a snapshot.
File types: R=regular recording; A=external alarm
recording; M=motion detection recording.
Lock file: Click the file you want to lock, then click
to lock the file.
Search locked file: Click to view the locked
file.
Return: Click to return to the calendar and
channel setup interface.
Note The system can lock up to 16 files. The size of
the locked file must be less than 25% of the
HDD total space. The first 16 G of each
partition cannot be locked.
The system can lock only one file at a time, and
cannot lock the extra streaming file. You cannot lock
a file that is currently writing or overwriting.
6 Card Number Search
7 Playback Control Panel See Table 3-5 on page 49 for more about the
Playback Control interface.
8 Time Bar Displays the recording type and its period in the
current search criteria.
In the 4-channel playback mode, there are four
corresponding time bars. In the single-channel
playback mode, there is only one time bar.
Use the mouse to click and select a color zone in the
time bar for playback. The NVR starts playing that
recorded video.
The time bar begins at 00:00 when you are setting
the configuration. The time bar displays the time
period for the video that is playing, plus a range of
time before and after.
Green=regular recorded file; Red=external alarm
recorded file; Yellow=motion detection recorded
file.
Table 3-4 Search GUI
Number Name Function
To Next Page
Loading...