Setup
______________________________________________________________________________________________
52
Network
Network Configuration
Configure network settings.
Network
HOST NAME – Hostname for the DVR on the network.
NETWORK TYPE – STATIC IP (User must manually define a static IP
address. Contact your network administrator for this information.)
DHCP (System gets IP address automatically from a DHCP server.)
IP ADDRESS – DHCP or Static. Contact your network administrator for this
information.
CLIENT CONFIGURATION – Set up the connection ports and Max transfer
speed for remote connections.
CENTER PORT – The HRDP uses the Center port and the primary
communication port to create remote connections. This port must be
the same as the port setting on the remote PC.
VIDEO PORT – The HRDP uses multiple ports to create remote
connections: the remote port is user defined (default 4000), and a
secondary port is automatically assigned (default 4002). The DVR
assigns the secondary port based on the remote port, in increments of
two. (ex: if you set the remote port to 4222, then the secondary port
will be 4224). Verify that all these ports are available when setting up
Network Address Translation (NAT) or firewall.
To Next Page
Loading...
Need help?
General