HRDP DVR User Guide
______________________________________________________________________________________________
Document 800-06801 Rev D 63
02/11
Popup Menu
Right-click the live screen to open the Popup Menu.
HIDE LIVE VIEW – Hide the selected
camera from Live view.
RECORD CHANGE – Change the
recording settings for that channel
including PPS, quality, resolution and
event response.
PAGE SEQUENCE – The SEQ icon is
shown on the bottom right of the screen
and displayed channels will be
sequentially changed.
FREEZE ALL – Pause all channels
displayed on-screen.
SHOW MOTION AREA – Display the
motion grid for the selected camera.
DISPLAY-PIP – Change screen display
to PIP.
AUDIO – Select an audio channel to play
(live).
LOGOFF – Select to log out the active user.
SEARCH – Open the Search Menu.
PTZ – Switch to PTZ mode.
MENU – Open the Setup Menu.
No Signal
If no camera is connected to a channel, NO SIGNAL is shown on the display
screen. When a camera is disconnected, the DVR will generate a warning
sound according to the system settings.
No Permission
The Administrator can set different levels of authorization for each user. If a
user is not allowed to view a certain live or playback channel, a NO
PERMISSION warning is shown on the display screen.
To Next Page
Loading...
Need help?
General