HRDP DVR User Guide
______________________________________________________________________________________________
Document 800-06801 Rev D 95
02/11
Alarm Monitor
The Alarm Monitor is used to view emergency alarms from the connected
DVRs, including Video Signal Loss and Sensor alarms. Use the Filter Options
to filter through the different types of alarms.
After viewing event video, include
a memo for future searches.
By double-clicking an alarm entry, the search window will open with the
associated DVR, camera, and time related to the event already selected.
Note If all Alarm Event results are not visible, click Off to turn the Filter
Options off.
Assign Status Settings
1. Select an Alarm Event from the list.
2. Right-click the event and select a status level: Default, Review, Dismiss,
Critical.
3. Select a defined Alarm Confirmed Type from the list under Status Setting.
4. Type a memo in the Memo box and click the memo button.
Thumbnails of Alarm Events
To Next Page
Loading...
Need help?
General