Honeywell Notifier NFG-8

PAGE - 30
NOTIFIER ITALY
Installation and Operation
Manual Doc. M-040.1-NFG8-EN
Rev A.3
NFG-8
NFG-8_manu-inst_ITA
Fig. 4.4.4.i) Events history screen
Below is an explanation of the different columns
Id identification number of the event. It can be used for comparison with the
event in the NFG-8 control unit.
Date date and time of the event
Event Type type of event. Event types can be the following
Event Type
Description
Confirmation
Capturing / silencing an event
Reset
Resetting an event
Info
Events such as user login and logout, return of an alarm, etc.
Configuration
Error in the configuration of the central unit
Settings
Parameters have been modified in the control unit (e.g. detector
alarm threshold).
Alarm
Alarm Event
Fault
Fault Event
Emergency
Emergency Event (typically a power failure)
Serial Track
Event concerning data transfer on serial port (data loading and
unloading from PC)
Event even more detailed indication of the type of event
Value value of gas concentration (in case of alarm event)
Units unit of measured value
User user identifier in case of "user" event (Ack, Reset, Login etc.)
Hardware device that generated the event (Rio Input module, gas detector,
Rio Out module, etc.).