RP-2002 Series Manual — P/N 53039:E6 1/26/2017 19
Optional Modules and Accessories Product Description
N-ANN-80 LCD Annunciator
The N-ANN-80 (black) and N-ANN-80-W (white) are remote LCD annunciators that mimic the
information displayed on the FACP LCD display.
N-ANN-80C LCD Indicator (Canadian applications)
The N-ANN-80C is a remote LCD indicator which mimics the information displayed on the FACP
LCD display but does not allow remote control of the FACP.
The N-ANN-80C is not ULC-S527 3
rd
Edition Listed.
N-ANN-LED Annunciator Module
The N-ANN-LED Annunciator Module provides three LEDs for each zone: Alarm, Trouble and
Supervisory.
N-ANN-RLY Relay Module
The N-ANN-RLY Module, which can be mounted inside the cabinet, provides 10 Form-C relays.
N-ANN-S/PG Serial/Parallel Printer Gateway
The N-ANN-S/PG module provides a connection for a serial or parallel printer.
N-ANN-I/O LED Driver Module
The N-ANN-I/O module provides connections to a user supplied graphic annunciator.
DP-51050 Dress Panel
A dress panel DP-51050 (red) is available as an option. The dress panel restricts access to the sys-
tem wiring while allowing access to the membrane switch panel. The Canadian version is supplied
standard with a modified dress panel.
TR-CE Trim-ring
A trim-ring TR-CE (red) is available as an option. The trim-ring allows semi-flush mounting of the
cabinet.
Battery Box
The NFS-LBB or BB-26 battery box may be used to house two batteries greater than 18 Amp Hour.
The battery box mounts directly below the control panel cabinet, centered to the main circuit board.
Battery Chargers
CHG-75 Battery Charger
The CHG-75 is capable of charging up to 75 AH lead-acid batteries with the FACP. The FACP
battery charger must be disabled, through software programming, when using the CHG-75. The
charger and up to 26 AH batteries can be housed in the BB-26 battery box. Larger batteries and the
charger can be housed in the NFS-LBB battery box which can be mounted up to 20 feet away from
the control panel. Refer to the CHG-75 Manual for additional information.
CHG-120 Battery Charger
The CHG-120 is capable of charging up to 120 AH lead-acid batteries with the FACP. The FACP
battery charger must be disabled, through software programming, when using the CHG-120. The
batteries and charger can be housed in the NFS-LBB battery box which can be mounted up to 20
feet away from the control panel. Note that when using the NFS-LBB for housing the charger and
batteries greater than 26AH, multiple NFS-LBBs are required. Refer to the CHG-120 Manual for
additional information.
To Next Page
Loading...
Need help?
General
