Honeywell OMNI 408 - Special Notes

OMNI-408/OMNI-408EU Installation and Setup Guide
1–2
• 4-wire smoke detectors with fire verification logic plus smoke power reset
• 2 entry and 1 exit time delays
• Swinger Shutdown capability
• Exit Error Warning
• European Ring Detect
• 128-Event Log History (viewable by PC downloading software and LCD keypad)
• End user chime ON/OFF toggle capability
• 2 programmable trigger outputs for various functions (including armed/ready indication and
glassbreak detector reset)
• Input power: 16.5VAC 25VA; 12VDC, 4 - 7 AH
• Output power: 11.5 - 13.1VDC, 500mA
• Bell output power: 10 - 15.5VDC, 1A
Special Notes
U
L
IMPORTANT - Failure to install and program this unit in accordance with the UL require-
ment is a violation of the listing mark. For more information on UL Listings, contact
Underwriters Laboratories, Progress Department, 333 Pfingsten Road, Northbrook IL
60062.
U
L
This Installation and Setup Guide includes references to the XK7LC keypad. Please note that
UL has not evaluated the XK7LC keypad with the OMNI408EU and it must not be used for UL
installations. Acceptable keypads for UL installations are the OMNI-LCD, OMNI-LCD-US,
OMNI-KP, OMNI-KP-US and XK108.