800-18161V1 - A - 07/2014
2
Configuration 2
This chapter includes:
• An overview of the Honeywell Configuration Tool.
• Installation procedures for the Honeywell Configuration Tool.
Overview
The Honeywell Configuration Tool can be used to:
• Search for the current IP address.
• Modify the current IP address.
• Upgrade the IP camera.
Note The Honeywell Configuration tool applies only to the IP addresses in the same
segment.
Starting the Honeywell Configuration Tool
You must install the Honeywell Configuration Tool before you can use it to discover IP devices.
To Next Page
Loading...
