800-18161V1 - A - 07/2014
3
Web Operation 3
This chapter includes:
• Instructions for connecting to your camera over the Internet.
• A description of the main Internet interface, and instructions on how to configure it.
• Instructions about configuring the camera setup.
Network Connection
The Performance Series IP Cameras support Internet access and management through your
PC. Through the Internet, you can do the following:
• Monitor channel preview
• Configure the system
• Configure and monitor alarms
Before You Begin
Ensure that the following conditions are met:
• Ensure that your network camera is properly connected to the network.
• Ensure that the camera IP address and PC IP address are in the same network segment. If
there is a router, set the corresponding gateway and subnet mask.
• Ping to check that the connection works well. Use "ping *** *** *** ***", where
"*** *** *** ***" is the network camera’s IP address.
To Next Page
Loading...
Need help?
General