www.honeywell.com/security
66 | Performance Series IP Cameras User Guide
UPnP
UPnP allows you to establish the mapping relationship between the LAN and the public network.
In the UPnP configuration interface, you can add, modify, or remove a UPnP item.
Figure 3-27 UPnP Configuration Interface
Interval The interval for sending ranges from 0 to 3600 seconds. 0 seconds
means that there is no interval.
The system will not immediately send the email when the alarm
occurs. When an alarm, motion detection, or abnormality occurs to
activate an email, the system sends the email according to the
interval you have specified here. This is very useful when there are
too many emails that have been triggered, which can result in a
heavy load for the email server.
Health Mail Enable Check to enable this function.
Update Period
(interval)
This allows the system to send a test email to check the connection.
Check to enable this function, and then set the corresponding email
interval.
You can set the Update Period so that the system sends out
regularly scheduled emails.
Email Test The system will automatically send an email to test the connection.
Before you can do an email test, you must save the email setup
information.
Table 3-14 SMTP (Email) Configurations
Parameter Function
To Next Page
Loading...
Need help?
General