Web Operation | 79
800-18161V1 - A - 07/2014
Storage
Recording Schedule and Snapshot Schedule
You can add or remove schedules for recording and snapshots.
There are two recording modes: General (auto) and Motion Detection.
You can configure up to six recording periods per day.
Note Ensure that you have enabled the corresponding recording mode in
Setup>Storage>Conditions.
Figure 3-40 Recording Schedule Configuration Interface
Recording Schedule Color Codes:
• Green: General recording/snapshot
• Yellow: Motion detection recording/snapshot
Setting Holidays
You can set specific days as holidays, for which the recording schedule is different. When
enabled, the selected/configured dates will record according to the holiday setup.
To Next Page
Loading...
Need help?
General