Web Operation | 65
800-18161V1 - A - 07/2014
SMTP (Email)
Figure 3-26 SMTP Configuration Interface
Table 3-14 SMTP (Email) Configurations
Parameter Function
SMTP Server Enter the server address.
Port The default value is 25. You can modify this value as necessary.
Anonymity Supports the anonymity function for the server. You can
automatically login anonymously. You do not need to enter the user
name, password, and the sender information.
Username The username for the sender’s email account.
Password The password for the sender’s email account.
Sender The sender’s email address.
Authentication
Enable
This is the encryption mode. Select SSL, TLS, or None.
Title Subject: Enter the email subject here.
Attachment If you check this box, then the system can send out an email with
the snapshot picture.
Mail Receiver Enter the receiver’s email address here. You can add a maximum
of three addresses.
To Next Page
Loading...
Need help?
General