Web Operation | 47
800-18161V1 - A - 07/2014
Image Control
Click to open the picture setup interface, which opens in the top right corner of the video
interface.
Figure 3-13 Image Adjustment Interface
Original Size
Click to return the video display to the original, actual size. This size depends on the
resolution of the bit stream.
Full Screen
Click to enter the full-screen mode. Double-click the mouse or press Esc on your
keyboard to exit the full screen mode.
Table 3-5 Image Adjustment Controls
Parameter Function
Video Setup
Adjust the monitor’s
brightness.
Note
• All the operations here
apply to the Web end
only.
• Go to Setup>Camera>
Conditions to adjust the
corresponding items.
Adjust the monitor’s contrast.
Adjust the monitor’s hue.
Adjust the monitor’s color
saturation.
Restore brightness, contrast,
saturation, and hue values to
defaults.
To Next Page
Loading...
Need help?
General