EasyManuals Logo

Honeywell ScanPal EDA5S User Manual

Honeywell ScanPal EDA5S
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
EDA5S Mobile Computer Series User Guide 13
Change the Screen Lock to Protect the Computer
After you start using the computer, you should change the screen lock to prevent
unauthorized persons from accessing the computer after the screen lock activates,
unless they input the correct password, PIN, or pattern.
The recommended setting for the Screen Lock is to enable a Password lock. Use a
strong password value (e.g., include numbers, characters, special characters, and
mixed character case).
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Security > Screen lock.
3. Choose one of the following options:
•None
Swipe
Pattern
•PIN
•Password
4. Follow the on-screen prompts to complete the setup.
5. Exit the Settings app.
Set Up Face Unlock
The face unlock feature is initially available as trial version for evaluation. After the
evaluation period expires, you need to purchase a license to use face unlock.
Contact a Honeywell representative for licensing information.
Face unlock allows you to unlock the computer in sleep mode by using facial
recognition with the front camera. A series of on-screen prompts guide you
through the process of capturing a face image that you can use to unlock the
computer.
Note: When face unlock is enabled, you must also have a backup method to unlock the
computer, such as PIN, pattern, or password. After the evaluation period expires for
face unlock, the feature is unavailable and the device can be unlocked only with the
backup method (PIN, pattern, or password).
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Security > Face Unlock.
3. If you have not set up a screen lock, you will be prompted to add a backup
method for unlocking the computer: PIN, pattern, or password.
4. Follow the on-screen prompts to complete the setup.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell ScanPal EDA5S and is the answer not in the manual?

Honeywell ScanPal EDA5S Specifications

General IconGeneral
Display diagonal5.5 \
Touch technologyMulti-touch
Touchscreen typeCapacitive
Display resolution1440 x 720 pixels
Internal memory- GB
Internal memory type-
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Maximum memory card size128 GB
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)5 - 90 %
Scanner type1D/2D
Product colorBlack, Grey
LED indicatorsBattery level, Operation
International Protection (IP) codeIP67
Electrostatic Discharge (ESD) protection (air)15 kV
Electrostatic Discharge (ESD) protection (contact)8 kV
Antenna type1x1
Data networkEDGE, GSM, HSPA+, LTE, UMTS
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth version5.1
Security algorithmsLEAP, PEAP, TLS, TTLS, WEP, WPA, WPA2, WPA2-Enterprise, WPA3, WPA3-Enterprise
Networking standardsIEEE 802.11d, IEEE 802.11e, IEEE 802.11h, IEEE 802.11i, IEEE 802.11k, IEEE 802.11r, IEEE 802.11u, IEEE 802.11v, IEEE 802.11w
Number of cores8
Processor familySnapdragon
Processor frequency2 GHz
Processor manufacturerQualcomm
Operating system installedAndroid
Rear camera resolution (numeric)13 MP
Front camera resolution (numeric)5 MP
USB 2.0 ports quantity1
Battery voltage3.8 V
Battery capacity3060 mAh
Battery life (max)8 h
Battery recharge time (on)3.5 h
Weight and Dimensions IconWeight and Dimensions
Depth11.2 mm
Width75 mm
Height159 mm
Weight218 g

Related product manuals