48 EDA5S User Guide
Dual SIM Dual Standby Mode
The nano-SIM and eSIM can be provisioned with either the same or different
mobile carriers. When both SIMs are provisioned, the EDA5S operates in Dual SIM
Dual Standby (DSDS) mode. In this mode, both SIMs can connect to the selected
mobile network. For example, you can have two phone lines on your mobile
computer where one is your business number and one is your personal number.
You can also choose which SIM to use for specific actions, such as calls or
messaging. These actions are defined in Settings > Network & internet > Mobile
network.
Provision eSIM
To connect to a mobile network using embedded SIM, the eSIM must be
provisioned by downloading and enabling an operational profile. ScanPal devices
use the eSIM Toolkit app to download carrier profiles into the eSIM chip and
manage the downloaded profiles.
Devices are enrolled by scanning a QR code. You can also manually enter a code
provided by the carrier. Contact your mobile carrier to obtain the QR code and any
other information required to activate the profile.
Note: Multiple profiles can be downloaded to the eSIM, but only one profile can be active.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap the eSIM Toolkit app.
3. Download the profile by scanning or entering a QR code:
a. If you have a QR code from the carrier, tap Scan Download. Scan the QR
code by keeping the code centered in the box.
b. If you do not have the QR code to scan but have an activation code from
your provider, tap Input Download. Enter the code in the text box then tap
OK.
4. A prompt indicates that the download was successful.
5. Tap the LUI button.
The profile is shown under Enabled carriers.
The Access Point Name (APN) for most global mobile operators is integrated in the
eSIM firmware. If the APN for your carrier is not integrated, you will need to
manually enter the APN settings in Settings > Network & internet > Mobile plan.
Provision nano-SIM Card
Note: On EDA5S WWAN models with an eSIM, you do not need to install a nano-SIM card
unless you want a dual carrier setup.
1. Press and hold the Power button until the options menu appears.
2. Tap Power Off.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
