12 EDA71 User Guide
Adjust Speaker Volume
Use the volume buttons on the side of the tablet to adjust the volume of ringtones,
media, notifications, and alarms.
1. To change the volume on the active speaker, do one of the following:
•Press the Volume Up button.
•Press the Volume Down button.
• Press any Volume button and drag the on-screen slider to the left to lower
the volume or to the right to raise the volume.
2. (Optional) Tap the down arrow to expand the options.
Use the stylus or the volume buttons to adjust each volume type.
• Use the slider for notifications and rings.
• Use the slider for media (e.g., music, videos).
• Use the slider for alarms.
Enable Vibrate Mode
You can use the Volume down button to quickly enable Vibrate mode so the com-
puter vibrates instead of emitting sound for notifications and rings. If you still want
to hear alarms, turn On the Alarms Only feature.
1. Press the Volume down button until the computer vibrates.
2. To turn On the Alarms Only feature, press the Volume down button again with
the volume slider open. The status bar at the top of the screen indicates the
active mode:
• When Vibrate mode is active, appears.
• When Alarms Only mode is active, the Do Not Disturb icon appears.
Audio Settings
This section describes the audio settings you an configure in the Settings app.
To change audio settings, select the Settings app and tap Sound.
Note: Sound settings are model dependent. Some settings may not be available for your
model type.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
