EasyManua.ls Logo

Honeywell ScanPal EDA71 - Full Factory Reset the Computer; Clean the Tablet

Honeywell ScanPal EDA71
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EDA71 User Guide 73
Full Factory Reset the Computer
1. Swipe up from the bottom of the Home screen to access all apps.
2. Select Settings > Backup & reset.
3. Tap Full factory reset.
4. Tap Reset Phone.
5. If prompted, type your screen lock security pattern, PIN, or password and tap
next ( ).
6. Tap Erase Everything. A message appears informing you an Full factory reset
is being performed.
Clean the Tablet
To keep the tablet in good working order, you may need to clean the scanner
window, color camera window, and the touch screen. Clean the windows and the
touch screen as often as needed for the environment in which you are using the
tablet. The tablet withstands application of the following cleaning agents when
applied to a clean soft cloth and removed immediately with a dry soft cloth:
Acetic acid, 10% in water
Ethyl alcohol, 10% in water
Mild soap solutions
Note: Always leave the battery installed when you clean the computer.
1. Press the Power button to suspend the computer.
2. Dip a clean cloth towel in the cleaning agent and wring out the excess.
3. Wipe off the scanner window, camera lens, and flash area. Do not allow any
abrasive material to touch these surfaces.
4. Wipe dry.
5. Let the computer completely air dry before using again.

Table of Contents

Related product manuals