EDA71 User Guide 19
Status and Notification Icons
Remap a Button or Key
You can change the default function of the physical buttons and keys.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Honeywell Settings > Key Remap.
3. Tap the plus sign (+).
4. Press the button or key you want to remap.
5. Tap OK.
6. Tap Keys or Applications to view the available functions.
7. Select the function you want assigned to the button. The function you selected
now appears next to the button or key name.
Restore Default Button Action
To restore the default button action:
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Honeywell Settings > Key Remap.
3. Tap the clean icon .
4. Choose the remapped button(s) you want restored to the default setting(s).
Icon Description Icon Description
Pending alarm and Alarm is set Vibrate mode is turned On
New text message or
multimedia message
Airplane mode is turned On
Error with text or multimedia
message delivery
Bluetooth is turned On
New email SD card is full
Computer is connected to a PC
with a SUSB cable
Wi-Fi network is connected with full
signal strength
Synchronizing data Fi-Fi network is connected but no
signal strength
Error with sync or sign-in Phone connected with full amount
of bars
Computer is connected with
Ethernet
Phone connected with full amount
of bars but no internet connection
To Next Page
Loading...
Need help?
General
Weight and Dimensions
