Honeywell ScanPal EDA71 User Manual

68 EDA71 User Guide
Install Software Updates with AutoInstall
Important: The EDA71 must have power for the entire length of the upgrade process or it could
become unstable. Do not attempt to remove the battery during the process.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Provisioning mode under Honeywell Settings.
3. Tap the toggle button to turn Provisioning mode On.
4. Save the upgrade file (*.zip or *.apk) to the following folder on the EDA71 tablet:
• Internal shared storage\honeywell\autoinstall
Software upgrades saved to this folder for installation, do not persist when a
Full factory reset or Enterprise data reset is performed.
5. Swipe up from the bottom of the Home screen to access all apps.
6. Tap AutoInstall Settings and verify Autoinstall is enabled .
7. Tap Packages Update from the AutoInstall Settings screen.
The tablet automatically initiates a reboot and installs the
software upgrade. The system update screen appears during the upgrade
process. When the update is finished, the lock screen appears.
8. Once installation is complete, turn Provisioning mode Off.
Note: Some updates do not require the computer to reboot before installation.
Optional microSD Card Method
The EDA71 comes equipped with a microSD card socket. You can install an
upgrade from a microSD card you insert in the computer.
Important: The EDA71 must have power for the entire length of the upgrade process or it could
become unstable. Do not attempt to remove the battery during the process.
1. On the EDA71, swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Provisioning mode under Honeywell Settings.
3. Tap the toggle button to turn Provisioning mode On.
4. Tap AutoInstall Settings . Verify AutoInstall is enabled .
5. Press and hold the Power button, and then tap Power off.
6. On your workstation (e.g., laptop, desktop computer), format the microSD card
and create a \honeywell\autoinstall folder on the root of the card.
7. Save the upgrade file in the autoinstall folder.
8. Install the microSD card in the EDA71, and then press the Power button.

Honeywell ScanPal EDA71 Specifications

General

Display diagonal	7 \
Display resolution	1280 x 720 pixels
Display technology	LCD
Processor cores	8
Processor model	SDM450
Processor family	Qualcomm Snapdragon
Processor frequency	1.8 GHz
Processor manufacturer	Qualcomm
Internal memory	2 GB
Internal memory type	-
Storage media	Flash
Card reader integrated	Yes
Compatible memory cards	MicroSD (TransFlash), MicroSDHC, MicroSDXC
Maximum memory card size	128 GB
Internal storage capacity	32 GB
Number of built-in speakers	1
Rear camera type	Single camera
Rear camera resolution (numeric)	13 MP
WWAN	Installed
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth version	4.2
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
Mobile network connection	No
USB 2.0 ports quantity	4
Device type	Mobile tablet
Form factor	Slate
Product color	Black
International Protection (IP) code	IP64
Platform	Android
Operating system installed	Android 8.0
Battery capacity	- mAh
Battery life (max)	8 h
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	84713000

Weight and Dimensions

Depth	21 mm
Width	118 mm
Height	214 mm
Weight	- g