3. Installation
3.4. Installation drawing number tables
Revision 1 SmartLine Wireless Temperature and Universal I/O User's Manual 13
3.4 Installation drawing number tables
If an installation drawing from the table below is required, please contact your local Honeywell
representative. Refer to Honeywell drawing numbers in Table 3-2 for detailed dimensions.
Abbreviated overall dimensions are also shown on the Specification Sheets for the transmitter
models, see References.
This section assumes that the mounting dimensions have already been taken into account and the
mounting area can accommodate the transmitter.
Table 3-2: Drawing numbers for temperature/UIO transmitters
DRAWING
DRAWING
NUMBER
INSTALLATION DRAWING STW TEMPERATURE UIO TRANSMITTERS 50148942
INSTALLATION INSTRUCTIONS PIPE MOUNTING BRACKET, FLAT
STW TEMPERATURE UIO TRANSMITTERS
50154107
INSTALLATION INSTRUCTIONS PIPE MOUNTING BRACKET, ANGLE
STW TEMPERATURE UIO TRANSMITTERS
50154108
To Next Page
Loading...
Need help?
General
