Name Description Data Type Data Size Access Class Enum Value Enum Description
UAP_STREV Field device application static data revision level. Uint16 2 Read Only Static Revision
CTS_VERSION Field device application CTS version. Uint16 2 Read Only Static
ITS_VERSION Field device application ITS version. Uint16 2 Read Only Static
DIAG_STATUS Field device application diagnostic status bitstring. BitString 4 Read Only Dynamic
2147483648 - Failure Status Failure status
1073741824 - Function Check Status Function check status
536870912 - Out of Speci fication Status Out of specification status
268435456 - Mainte nance Re quired Status Maintenance required status
134217728 - Fault i n Electronics Faults in electronics
67108864 - Fault i n Sensor Faults in sensor
33554432 - Installati on or Calibration Problem Installation or calibration problem
16777216 - Out Of Service At least one Transducer is OOS
131072 - Manual Mode Active At least one Transducer is in Manual Mode
1048576 - Power is Criti call y Low Power is critical low: maintenance needed
128 - Calibration Error Error in Calibration
1 - Detail Information Available Detail information available
UAP_OPTION Option BitString 2 Read/Write Static
8192 - Enable Software Write Protect Enable Software Write Protect
UAPMO_ALERT No Help Available Uint8 1 Read/Write Static
0 - Begin Alert Recovery No Help Available
1 - End Alert Recovery No Help Available
2 - Device Restart No Help Available
3 - Maintenance Alert No Help Available
4 - Out of Specification Alert No Help Available
5 - Function Check Alert No Help Available
6 - Failure Status Alert No Help Available
DIAG_STATUS_DETAIL_1 Device self-diagnosis information BitString 4 Read Only Dynamic
1 - Electronics Failure An electronic component has failed
4 - Input Failure Input failure
16 - Low Battery Battery needs replacement
128 - Calibration Error Persistent calibration error
SENSOR_DEVREV Device Revision Uint16 2 Read Only Static
SENSOR_BUILD Software Version Uint16 2 Read Only Static
MAINTENANCE_ALERT Maintenance Alert BinaryAlarmDesc 2 Read/Write Static
MAINTENANCE_ALERT.ALERT_DISABLE Enable or Disable the Alert Boolean 1 Read/Write Static
MAINTENANCE_ALERT.ALERT_PRIORITY Priority set for the Alert Uint8 1 Read/Write Static
OUT_OF_SPEC_ALERT Out of Specification Alert BinaryAlarmDesc 2 Read/Write Static
OUT_OF_SPEC_ALERT.ALERT_DISABLE Enable or Disable the Alert Boolean 1 Read/Write Static
OUT_OF_SPEC_ALERT.ALERT_PRIORITY Priority set for the Alert Uint8 1 Read/Write Static
FUNCTION_CHECK_ALERT Function Check Alert BinaryAlarmDesc 2 Read/Write Static
FUNCTION_CHECK_ALERT.ALERT_DISABLE Enable or Disable the Alert Boolean 1 Read/Write Static
FUNCTION_CHECK_ALERT.ALERT_PRIORITY Priority set for the Alert Uint8 1 Read/Write Static
FAILURE_STATUS_ALERT Failure Status Alert BinaryAlarmDesc 2 Read/Write Static
FAILURE_STATUS_ALERT.ALERT_DISABLE Enable or Disable the Alert Boolean 1 Read/Write Static
FAILURE_STATUS_ALERT.ALERT_PRIORITY Priority set for the Alert Uint8 1 Read/Write Static
POWER_SOURCE Power source Uint8 1 Read Only Dynamic
1 - Battery Module Powered by internal battery
2 - 24V External Power Modul e Powered using 24V external power
To Next Page
Loading...
