3. Installation
3.7. Rotate transmitter housing
18 SmartLine Wireless Temperature and Universal I/O User's Manual Revision 1
3.7 Rotate transmitter housing
You can rotate the transmitter for better viewing, access, or antenna position. Loosen set screw (see A in
Figure 3-6) on outside neck of transmitter one full turn. Rotate transmitter housing up to 180 degrees in
either direction to desired position. Tighten set screw.
CAUTION
Do not rotate the housing past 180 degrees in any direction or you
could damage the internal wiring.
Figure 3-6: Rotating transmitter housing
To Next Page
Loading...
