7. Operation
7.4. Provisioning Device menus
52 SmartLine Wireless Temperature and Universal I/O User's Manual Revision 1
7.4 Provisioning Device menus
Overview
Hold the Provisioning Device no more than 6” (15 cm) from the transmitter and aim the infrared
beam at the transmitter display while tapping on the screen command or button.
Main menu
The main menu is shown below. Details start on the next page.
Figure 7-1: Main menu
Security and Node Deployment
Use this to:
• receive new security keys,
• transmit security keys for connecting the transmitter (or other nodes) to the OneWireless
network,
• clear all security keys from the Provisioning Device,
• clear the transmitter’s key and reset its configuration to factory defaults (such as for
deprovisioning).
NOTE: Device Local Configuration is not supported. All configuration access must be done
online via the WDM interface.
To Next Page
Loading...
