7. Operation
7.1. Transmitter connection status
44 SmartLine Wireless Temperature and Universal I/O User's Manual Revision 1
SENDSMCR
The transmitter is sending a Control Request
to the Security Manager Network Object
Wait for connection. If the transmitter does
not make a connection within five minutes,
see UNJOINED in this table.
SMCRSENT
The transmitter has sent a ControlRequest to
the Security Manager Network Object and is
awaiting a response
Wait for connection. If the transmitter does
not make a connection within five minutes,
see UNJOINED in this table.
SEND SCR
The transmitter is sending a Security
Confirmation Request to the Network
Wait for connection. If the transmitter does
not make a connection within five minutes,
see UNJOINED in this table.
SCR SENT
The transmitter has sent a Security
Confirmation Request to the Network and is
awaiting a response
Wait for connection. If the transmitter does
not make a connection within five minutes,
see UNJOINED in this table.
SJR SENT
The transmitter has sent a Secure Join
Request to the Network and is awaiting a
response
Wait for connection. If the transmitter does
not make a connection within five minutes,
see UNJOINED in this table.
-No MAC-
The Radio Has not been assigned a MAC
address at the factory.
Contact Honeywell Support. A new radio is
required.
JOINED
Transmitter has validated the key and has
made a secure connection with at least two
Multinodes. Transmitter should appear in
OneWireless User Interface as an
uncommissioned device.
No action required.
To Next Page
Loading...
