Honeywell SMX-AUS - Page 33

User’s Guide SMX-AUS
NS-MN-0032 / 11.2020 33
7.
The following screen opens. Choose either Onboard or Loop circuits.
Fig. 34: Zone Test – Test with selective sounder
8.
For Onboard circuit, the following screen opens. Select either Sounder 1 or Sounder 2 and
tap ASSIGN. You can tap UNASSIGN to clear the selection.
9.
Tap START TEST.
Fig. 35: Zone Test – Test with Onboard sounder – Select Sounder