Honeywell SMX-AUS - Page 34

User’s Guide SMX-AUS
34 NS-MN-0032 / 11.2020
10.
For Loop circuit, the following screen appears with the list of zones in the panel and the
sounder output devices associated with each zone. Tap next to the selected zone.
Fig. 36: Zone Test – Test with Loop sounder – Select Zone
11.
The following screen appears with the list of sounder output devices in the selected zone.
12.
Select a sounder and tap ASSIGN. You can tap UNASSIGN to clear the selection.
13.
Tap START TEST.
Fig. 37: Zone Test – Test with Loop sounder – Select Sounder