7
PREPARING FOR INSTALLATION
Contents of the kit
Before you begin, unpack the shipment and check the parts list
against the components in the shipment.
Your shipment should contain:
• TS2 device
• Metal Device Support Plate.
Into the device are housed:
• +12V connector
• LonWorks connector
• Battery 6V 1.2 Ah (not wired)
Optional Parts
It is possible to order following optional parts for this device:
Code Item
TSACC01 TORX T10 screwdriver
Spare Parts
It is possible to order following spare parts for this device
Code Item Details
1801026 Battery 6V 1.2 Ah
1520185 TS2 LonWors Xboard Plug-in for Lon connection
1700237 Fuse F1 3A 250V delayed (5X15 UL omega) wired
Mounting tools
The following screwdrivers are required for the installation:
• 3mm slotted screwdriver
• 3mm cross screwdriver
• 5mm cross screwdriver
• T10 Torx screwdriver
To Next Page
Loading...
Need help?
General
