Need help?Do you have a question about the Honeywell Temaline TS2 and is the answer not in the manual?
General| Control Mode | PID, On/Off |
|---|---|
| Output | Analog |
| Input Voltage | 24V AC/DC |
| Output Voltage | 24V AC/DC |
| Power Consumption | 5 VA |
| Operating Temperature | -10°C to 55°C |
| Enclosure Rating | IP65 |
Outlines the manual's scope for installing and maintaining TS2 devices, including operational and troubleshooting details.
Describes the TS2 as a Temaline controller and its managed applications like Access Control, Time&Attendance, etc.
Explains the typical system architecture including TS2, TemaPower, and field devices (RTUs) connected via Ethernet and LonWorks.
Provides an overview of the TS2 device components, essential for understanding the installation phase.
Crucial safety instructions before commencing TS2 device installation, including power disconnection.
Guidelines on fire safety, egress, and the necessity of obtaining written approval from local fire officials.
Procedure for filing claims with the commercial carrier if any damage to the shipment is noticed.
Procedures to prevent damage from electrostatic discharge to integrated circuits and components.
Step-by-step guide for carefully unpacking the TS2 device and checking contents for missing or damaged items.
Procedures for returning equipment, including contacting customer service and obtaining a Return Merchandise Authorization.
Details the 18-month warranty period, covering defects in materials and workmanship, and its limitations.
Provides further information on the EBI Tema system, commissioning steps, and system configuration.
User manual for the TS2 Web Interface, used for commissioning and maintenance operations.
A whitepaper discussing Temaline system rules and considerations for operation in harsh environments.
Lists the essential components included in the TS2 device shipment before starting the installation process.
Details optional parts that can be ordered and lists available spare parts for the TS2 device.
Specifies the types of screwdrivers (slotted, cross, Torx) needed for the TS2 installation.
Guidance on selecting the correct wire size for the power supply based on length and voltage drop.
Specifies twisted-pair data cables for LonWorks bus, including length and capacity limitations for different topologies.
Explains space requirements for wall mounting the TS2 device and its associated enclosure.
Instructions on drilling holes and securing the TS2 device support plate to the wall.
Steps to attach the TS2 device to the support plate hooks and secure it with screws.
Instructions for connecting the DC power supply to the J1 connector on the TS2 main board.
Steps for connecting the LonWorks cable to the J6 connector on the LonWorks Xboard.
Details on connecting the 10/100BaseT Ethernet cable to the T1 connector.
Instructions for connecting the battery to the J2 connector on the TS2 main board.
Steps to securely close the TS2 terminal cover using special screws and plugs.
Provides basic tips for device commissioning, directing users to external documentation for full details.
Mentions configuration of TemaServers, referring users to external guides for detailed procedures.
States the default IP address assigned to the TS2 device from the factory, to be changed upon first connection.
Guides on checking the installed FW version and updating it using the web interface for compatibility.
Shows a diagram illustrating the TS2 device and its main internal boards (Main board and LonWorks Xboard).
Introduces a detailed representation of the electronic components and the main circuit of the TS2 device.
Details the function, default state, and meaning of switches and LEDs on the TS2 main board.
Explains the function and default state of jumpers (JP1, J6) on the TS2 main board for configuration.
Describes the seven configuration jumpers (CN1.1-CN1.7) on the TS2 Lonwork Xboard for various functions.
Details the configuration jumpers (JP1, JP4) and switch (SW1) on the Lonwork Xboard for normal operation.
Explains the function, normal status, and potential failures of diagnostic LEDs (DL1-DL6) on the LonWorks Xboard.
Describes the internal anti-open tamper switch (S1) and external tamper connection points (J1, J3).
Instructions for resetting the TS2 device by pressing the Reset Button and safely switching it off.
How to perform a quick health check using diagnostic LEDs on the TS2 LonWorks Xboard without special tools.
Steps for replacing the fuse (F1) embedded in the battery connection wire for the TS2 device.
Procedure for replacing the internal TS2 battery every 3 years, including safety precautions.
Details various conditions leading to impaired operation and their potential results, such as damage or communication loss.
Explains protective features to reduce fire risk (temperature, battery, fuse) and electric shock risk (wiring during power).
Comprehensive list of electrical, technical, physical, and environmental specifications for the TS2 device.
Lists EU directives (EMC, Safety, RoHS) and standards for CE compliance of the TS2 device.
Details compliance with harmonized standards for 'Access Control System for use in Security Applications'.
Information regarding the UL listing (UL60950) for Canada and the United States, confirming product compliance.
FCC compliance statement, including conditions for operation and potential interference issues.
Declarations for RoHS, WEEE, and China RoHS compliance, addressing hazardous substances and disposal.
Explains the meaning and location of graphical symbols used on the product and packaging, per IT safety standards.
To Next Page