20 https://extranet.honeywell.com
160.221.230.127
After the first connection, the IP address must be changed
because, to avoid conflicts, every device in the network must have
a different address.
To change the IP address please refers to:
EBI - Temaline Access Control Configuration Guide
Configuring the TemaServers / Configuring the TemaServer2
Factory FW version
A device is shipped from factory with a running version of the FW
application corresponding to the most recent version of the
released FW available at the manufacturing time. The installed
version may not be suitable for your plant or a more recent version
of the FW could be available.
You should verify the FW version installed on your device and
check the Temaline compatibility matrix distributed on the EBI site
to see if it is required to update (or downgrade if you are working
on a plant running with old releases) the device FW.
To verify the FW application version running on the device and to
update the FW version please refers to:
Temaline - TemaServer2 Web Interface Guide
Maintenance / Downloading the program
To Next Page
Loading...
